This is a bench test of a newly designed custom sequencer, with 32 channels, expandable up to 48 channels. In this unique situation the shape of a Y was desired by the customer, with the requested function of a running light, that doubles as a sequential turn signal.
If you look at the wiring in the background, you can see 41 unique wires soldered at 67 points to connect the 32 Power LEDs. It is temporarily hooked up for testing purposes, but ultimately 35 of the individual wires will require a perfectly spaced hole drilled to run through during the mounting process, where it will finally be installed in the center of a set of concept tail lights. The brake light function will be handled by the same type of LEDs lining the perimeter of the taillights, which will be controlled independently of this sequential LED system.
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
If you look at the wiring in the background, you can see 41 unique wires soldered at 67 points to connect the 32 Power LEDs. It is temporarily hooked up for testing purposes, but ultimately 35 of the individual wires will require a perfectly spaced hole drilled to run through during the mounting process, where it will finally be installed in the center of a set of concept tail lights. The brake light function will be handled by the same type of LEDs lining the perimeter of the taillights, which will be controlled independently of this sequential LED system.
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
Is that Autechre?
Hey quick question, do you solder the leds onto the strip or do you just use a premade led strip. Just wondering because they're very bright.
Can this be done on a bmw 116i taillights?
mind telling me what kind of led's those are?
What kind of microprocessor do you use or is it all analog?
hi I have Nissan Silvia S15 tail lights. can you do this to mine tail lights? thanx
very good, a question that using bone types LED components or control cards , I would be very grateful if you give me information
2015 Fiesta st in need of some of these bad boys. damn that's the slickest shit on a bench right there.
What size wire does it take to run these power leds
What kind of LEDS do you use?
Lindo
Could you make me some custom tail lights for my Honda oddysey?
holy hell! that is bright o.0 very cool