What do you think is the Best tool to open up headlights?
We use Milwaukee M12 Multi Tool on these headlights and tailights
If you enjoyed this, here's a ton of quick videos you'll enjoy!
https://www.youtube.com/watch?v=QW9DHgNh0sI&list=PL_jPzj3LE6RSli32xVNjOzJqIlxvJamrs
#shorts
#LEDlights
We use Milwaukee M12 Multi Tool on these headlights and tailights
If you enjoyed this, here's a ton of quick videos you'll enjoy!
https://www.youtube.com/watch?v=QW9DHgNh0sI&list=PL_jPzj3LE6RSli32xVNjOzJqIlxvJamrs
#shorts
#LEDlights
So when i cut open these lamborghini tail lights, the way that i did it was with this tool from milwaukee. It's an oscillating multi-tool and the cool thing with this is because of the way that its little blade is. It can make a nice clean straight line. Cut especially if you have something that is a very linear pattern that you're cutting when i cut certain types of tail lights, i'll use a dremel, but for this one it really does chop right into plastic really fast.
So if you have to cut open your lights, let me know: have you done this a dremel or an ultrasonic cutter?.
Thanks for all your videos!
How do you get it back together?
I used one recently on my headlights and made the job so much easier, faster and like you said clean cuts
I used a dremmel.
Why not using a wondercutter? You had a video reviewing an ultrasonic cutter, can you help me to fiind it? Thanks!
I use a dremmel makes more of a mess but when done right does a nice cut
My man, try the Fuel version…WAY smoother and cuts smoother/cleaner/faster. My non-Fuel died on me mid bathroom remodel and I picked up the Fuel version…wont ever go back