This is SRLSS version 2.0 (Switchback Running Lights w/ Sequential Signals) using exLEDs L2 Power LED controlled by a 16 Channel controller which is expandable up to 48 Channels. These lights will turn on White with the parking/running lights of the car and stay on with the low beams. When the turn signal is activated, the White LEDs shut off while Amber LEDs sequentially zip across from the inside corner to the outside. 2 extra "Show Only" bonus modes are included, which included a laser like Amber LED effect, as well as the double stacking white and amber effect that really draws some attention!
The previous Mercedes SL550 jobs we did were both fully painted OEM Gloss Black with superflux LEDs powered at 3.2V each for white, and 2.4V each for the amber LEDs. We were limited to 16 channels, and only had 5000K White available for the color. This presented a problem with trying to match other LED products to the strip, and the nature of the clear little square LEDs, allowed them to be washed out by backlighting. These new Power LEDs are brighter, longer, and create the closest thing to a continuous strip (in single color setups) that we've seen from any product on the market. The LEDs are 9v-18v capable, and can be trimmed each LED, with a full 12-14.5 shot of voltage to each LED. Combined with our new controllers, this truly is the best Sequential LED work we've been able to pull off, and its something really special to see in person!
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
The previous Mercedes SL550 jobs we did were both fully painted OEM Gloss Black with superflux LEDs powered at 3.2V each for white, and 2.4V each for the amber LEDs. We were limited to 16 channels, and only had 5000K White available for the color. This presented a problem with trying to match other LED products to the strip, and the nature of the clear little square LEDs, allowed them to be washed out by backlighting. These new Power LEDs are brighter, longer, and create the closest thing to a continuous strip (in single color setups) that we've seen from any product on the market. The LEDs are 9v-18v capable, and can be trimmed each LED, with a full 12-14.5 shot of voltage to each LED. Combined with our new controllers, this truly is the best Sequential LED work we've been able to pull off, and its something really special to see in person!
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
Since no one wants to work on my stalled project could I get a parts list to try and do this on my lights? Maybe I'll be able to get some time to try and work on my lights….
You have any videos of finished lights being installed on car. How's the wiring done? Controller in headlights or on car? Do you have to run a ton of wire for the lights?
so would I have to ship my headlights out to you? and what would something like that cost?
where did you get the LED controller?
Look cool, wish I could put it in my stalled f350 retrofit. What is that stacking effect? Is that just a show-off feature, or is there an actual intended use for that effect? You sell this externally or just in work you do? If so how much? ?