How do you clean INSIDE the headlight lens without scratching the fragile inner liner (Anti Fog layer)? Here are 3 Ways to approach the problem of cleaning lenses on a set of Custom Headlights.
Spoiler Alert: Ideally by never touching it with anything, ESPECIALLY A SPONGE AND A MAGNET (oof)!
We're talking about expensive custom lights, not the 25 year old family wagon with years of buildup inside.
Here's the plug in Compressed Air alternative I recommend:
https://amzn.to/3f5VdHL
And the fancy Adam's Polishes Microfiber like Pavel uses:
https://amzn.to/30Y3cl9
Here's my Amazon Shop List for all of the Cleaning Products
https://www.amazon.com/shop/flyryde?listId=3B91RBMD0GJK5
Join the Community as a Channel Member!
https://www.youtube.com/channel/UCtLbl2wHOgnl8XIDDOtZEiw/join
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
What's up, I'm Chris! Stoked to have you on this video, and here's a bunch of things you can do next if you'd like to know more!
►If you're JUST GETTING STARTED... check out these videos:
Opening Headlights
https://www.youtube.com/watch?v=ZCvzUS_xo9Y&t=76s
Angel Eyes
https://www.youtube.com/watch?v=cFVpXt-a0wo&t=2s
Demon Eyes
https://www.youtube.com/watch?v=jWHEccOQV8I&t=622s
Sequential LEDs
https://www.youtube.com/watch?v=_luUCXGFTQ8&t=1347s
►DON'T Do these 5 Things:
https://www.youtube.com/watch?v=KfqjlrfPe6I&t=2s
►How to help me GO FULL TIME!
https://www.youtube.com/watch?v=U2ZHgL7REoE
►Want to work with me?
I can't take on much, but watch this video and read though my contract (which you're free to use for your customers too, btw):
https://flyryde.com/pages/contract
★FlyRyde Merch
https://teespring.com/stores/flyryde
★Discounts from Brands for FlyRyde Fam!
https://flyryde.com/pages/discounts
● Amazon Links
- Amazon Prime 30-day free trial: https://amzn.to/2JhTYHR
Materials & Supplies:
-RetroRubber Headlight Sealant: https://amzn.to/2xs0SVm
-Chrome Stripping Degreaser: https://amzn.to/30f4mXN
-Heat Shrink Tubing: https://amzn.to/2Xn2bnR
-30 Pin Ribbon Cable: https://amzn.to/2LyoW10
-30 Pin Header: https://amzn.to/2xqnMfH
-Q Bond Headlight Repair: https://amzn.to/2Xg0Fil
-Weld-On Acrylic Glue: https://amzn.to/2Lzp8Nq
-Potting Epoxy: https://amzn.to/301bMNS
Tools:
-BEST Right Angle Impact Driver: https://amzn.to/2ROrvwT
-M12 Drill set: https://amzn.to/2ZZIVK2
-Heat Gun: https://amzn.to/2NtMAhL
-Soldering Iron (on the go): https://amzn.to/2Lwm4li
-Soldering Station: https://amzn.to/2LwxJR9
-Wire Strippers: https://amzn.to/2LyosIe
-Dremel: https://amzn.to/2Lwgi33
-Dremel Flex Shaft: https://amzn.to/2LtTmkS
-Dremel Plastic Cutting Blade: https://amzn.to/2XnOAbe
Parts:
-4 Channel Remote Control: https://amzn.to/2XhOrpx
https://www.amazon.com/shop/flyryde/ref=cm_sw_r_tw_loc_4.oRBbEA2XRZV
(I will receive an affiliate commission for orders made directly after visiting my Amazon Influencer Page)
ⓢⓤⓑⓢⓒⓡⓘⓑⓔ
https://www.youtube.com/user/flyryde?sub_confirmation=1
Call us: (909) 684-5044
Website: http://www.FlyRyde.com
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde

By Chris

12 thoughts on “3 ways to safely clean inside headlight lenses”
  1. Avataaar/Circle Created with python_avatars Danny says:

    For the second method, placing the lens om a fixture would give a better chance of not accidentally damaging the inside

  2. Avataaar/Circle Created with python_avatars Jaques Tone says:

    Lasted about 13 seconds before I turned it off.
    I don’t need to hear you yammering about how cool you are. I’ll figure it out myself.

  3. Avataaar/Circle Created with python_avatars Ildo Dodaj says:

    COME HAI FATTO PROVARLO?

  4. Avataaar/Circle Created with python_avatars Drive With Andy says:

    My custom headlights had issues and went back and forth and due to them being opened and closed about 3 times they now work but they are misting up like crazy and got all sorts of dirty marks inside. I don't want to be sending them back again. So want to try heat them up, open them up with the slide technique you have shown, clean them and re seal. Shall I still do the washing up liquid and water move around with no running and then dampen a micro fibre and gently wipe? Then I was going to blow dry them and I have kitchen towel to wipe clean. Would this be ok? Then wonder if I need more of that butyl stuff adding or just heat up what there and add more sealant around them the next day. Advise would be great. Thanks

  5. Avataaar/Circle Created with python_avatars Tony Jaquez says:

    Man glad i found this video! I was about to open mine up and polish the inside.😂 can I send you sone pictures of these lights and you let me know if they're even worth saving?

  6. Avataaar/Circle Created with python_avatars Tanase Petrus says:

    Good thing I procrastinate, because I was going to polish the inside of the only pair of headlights I have xD

  7. Avataaar/Circle Created with python_avatars april imel-worthington says:

    So how can u clean the inside lens w/o taking the whole car apart to do it

  8. Avataaar/Circle Created with python_avatars stephen umphress says:

    Have you ever seen LEDs cause hazing on the inside film? I recently took my stock ones apart to paint the housing black and put new lenses on. I also changed the bulbs to SMDs and I noticed both the sidemarkers sections got hazing around the bulb, so I had to take it apart and clean whatever it was off and re-seal. I switched to a super low heat led and that seemed to fix the issue. BUT there’s no way that any LED burns hotter than stock. I’m just at a loss as to what would cause this other than heat. Maybe the lenses are just crappy?

  9. Avataaar/Circle Created with python_avatars J Fray says:

    I got a headlight that doesn’t come apart. Only a quarter size hole to get into ? Any ideas?

  10. Avataaar/Circle Created with python_avatars Baryłka 7procent says:

    ounce i live caps open in sprayroom and same problem

  11. Avataaar/Circle Created with python_avatars Mikee Vee says:

    My 2013 Nissan Altima has the projectors inside, the lenses on them are cloudy and need cleaning. I was hoping this would help me, it doesn't seen like it will.

  12. Avataaar/Circle Created with python_avatars Picks Productions says:

    Method 4: Have a fender bender that isn’t your fault, get them replaced by insurance for free lol

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.