How HARD to Open Tail Lights?
I'm pretty decent when it comes to a dremel, ultra sonic cutter, or these Milwaukee Multi-Tools, but I never know how hard a new tail light will be.
Grab your Milwaukee Oscillating Multi-Tool on Amazon (this is my affiliate link):
https://amzn.to/2Wu5YvO
Join the Community on Discord
https://discord.gg/NxDQU78
Tune in and follow the Stream Live DAILY at https://twitch.tv/flyrydechris
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
What's up, I'm Chris! Stoked to have you on this video, and here's a bunch of things you can do next if you'd like to know more!
►If you're JUST GETTING STARTED... check out these videos:
Opening Headlights
https://www.youtube.com/watch?v=ZCvzUS_xo9Y&t=76s
Angel Eyes
https://www.youtube.com/watch?v=cFVpXt-a0wo&t=2s
Demon Eyes
https://www.youtube.com/watch?v=jWHEccOQV8I&t=622s
Sequential LEDs
https://www.youtube.com/watch?v=_luUCXGFTQ8&t=1347s
►DON'T Do these 5 Thinks:
https://www.youtube.com/watch?v=KfqjlrfPe6I&t=2s
►How to help me GO FULL TIME!
https://www.youtube.com/watch?v=U2ZHgL7REoE
►Want to work with me?
I can't take on much, but watch this video and read though my contract (which you're free to use for your customers too, btw):
https://flyryde.com/pages/contract
★FlyRyde Merch
https://teespring.com/stores/flyryde
★Discounts from Brands for FlyRyde Fam!
https://flyryde.com/pages/discounts
● Amazon Links
- Amazon Prime 30-day free trial: https://amzn.to/2JhTYHR
Materials & Supplies:
-RetroRubber Headlight Sealant: https://amzn.to/2xs0SVm
-Chrome Stripping Degreaser: https://amzn.to/30f4mXN
-Heat Shrink Tubing: https://amzn.to/2Xn2bnR
-30 Pin Ribbon Cable: https://amzn.to/2LyoW10
-30 Pin Header: https://amzn.to/2xqnMfH
-Q Bond Headlight Repair: https://amzn.to/2Xg0Fil
-Weld-On Acrylic Glue: https://amzn.to/2Lzp8Nq
-Potting Epoxy: https://amzn.to/301bMNS
Tools:
-BEST Right Angle Impact Driver: https://amzn.to/2ROrvwT
-M12 Drill set: https://amzn.to/2ZZIVK2
-Heat Gun: https://amzn.to/2NtMAhL
-Soldering Iron (on the go): https://amzn.to/2Lwm4li
-Soldering Station: https://amzn.to/2LwxJR9
-Wire Strippers: https://amzn.to/2LyosIe
-Dremel: https://amzn.to/2Lwgi33
-Dremel Flex Shaft: https://amzn.to/2LtTmkS
-Dremel Plastic Cutting Blade: https://amzn.to/2XnOAbe
Parts:
-4 Channel Remote Control: https://amzn.to/2XhOrpx
https://www.amazon.com/shop/flyryde/ref=cm_sw_r_tw_loc_4.oRBbEA2XRZV
(I will receive an affiliate commission for orders made directly after visiting my Amazon Influencer Page)
ⓢⓤⓑⓢⓒⓡⓘⓑⓔ
https://www.youtube.com/user/flyryde?sub_confirmation=1
Call us: (909) 684-5044
Website: http://www.FlyRyde.com
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
I'm pretty decent when it comes to a dremel, ultra sonic cutter, or these Milwaukee Multi-Tools, but I never know how hard a new tail light will be.
Grab your Milwaukee Oscillating Multi-Tool on Amazon (this is my affiliate link):
https://amzn.to/2Wu5YvO
Join the Community on Discord
https://discord.gg/NxDQU78
Tune in and follow the Stream Live DAILY at https://twitch.tv/flyrydechris
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
What's up, I'm Chris! Stoked to have you on this video, and here's a bunch of things you can do next if you'd like to know more!
►If you're JUST GETTING STARTED... check out these videos:
Opening Headlights
https://www.youtube.com/watch?v=ZCvzUS_xo9Y&t=76s
Angel Eyes
https://www.youtube.com/watch?v=cFVpXt-a0wo&t=2s
Demon Eyes
https://www.youtube.com/watch?v=jWHEccOQV8I&t=622s
Sequential LEDs
https://www.youtube.com/watch?v=_luUCXGFTQ8&t=1347s
►DON'T Do these 5 Thinks:
https://www.youtube.com/watch?v=KfqjlrfPe6I&t=2s
►How to help me GO FULL TIME!
https://www.youtube.com/watch?v=U2ZHgL7REoE
►Want to work with me?
I can't take on much, but watch this video and read though my contract (which you're free to use for your customers too, btw):
https://flyryde.com/pages/contract
★FlyRyde Merch
https://teespring.com/stores/flyryde
★Discounts from Brands for FlyRyde Fam!
https://flyryde.com/pages/discounts
● Amazon Links
- Amazon Prime 30-day free trial: https://amzn.to/2JhTYHR
Materials & Supplies:
-RetroRubber Headlight Sealant: https://amzn.to/2xs0SVm
-Chrome Stripping Degreaser: https://amzn.to/30f4mXN
-Heat Shrink Tubing: https://amzn.to/2Xn2bnR
-30 Pin Ribbon Cable: https://amzn.to/2LyoW10
-30 Pin Header: https://amzn.to/2xqnMfH
-Q Bond Headlight Repair: https://amzn.to/2Xg0Fil
-Weld-On Acrylic Glue: https://amzn.to/2Lzp8Nq
-Potting Epoxy: https://amzn.to/301bMNS
Tools:
-BEST Right Angle Impact Driver: https://amzn.to/2ROrvwT
-M12 Drill set: https://amzn.to/2ZZIVK2
-Heat Gun: https://amzn.to/2NtMAhL
-Soldering Iron (on the go): https://amzn.to/2Lwm4li
-Soldering Station: https://amzn.to/2LwxJR9
-Wire Strippers: https://amzn.to/2LyosIe
-Dremel: https://amzn.to/2Lwgi33
-Dremel Flex Shaft: https://amzn.to/2LtTmkS
-Dremel Plastic Cutting Blade: https://amzn.to/2XnOAbe
Parts:
-4 Channel Remote Control: https://amzn.to/2XhOrpx
https://www.amazon.com/shop/flyryde/ref=cm_sw_r_tw_loc_4.oRBbEA2XRZV
(I will receive an affiliate commission for orders made directly after visiting my Amazon Influencer Page)
ⓢⓤⓑⓢⓒⓡⓘⓑⓔ
https://www.youtube.com/user/flyryde?sub_confirmation=1
Call us: (909) 684-5044
Website: http://www.FlyRyde.com
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
I'm going through this with some 2018 Ford edge taillights, very helpful.
Stayed to the end. I have a set of is300 light I have been racking my brain to cut how you have or cut the ultrasonic weld. I think you have a very strong argument about cutting on the inside of the ultrasonic weld.
Hey man, watched to the end lol 😂 probably the best of your videos I've watched yet! Cheers man 🤜🤛
Buy hot air gun arrr…..
Do g35 tail light halos
Apparently American Honda did NOT want that tail lamp to separate from its lens. EVER
Finally a Cl7 taillight video🤦🏽♂️
Wanting to do my kuga rear lights but unsure how to start have taken pic but not sure what’s best way to tackle it
Awesome video bro, thanks for sharing, Im about to open my set of Scion FR-S Valenti Revos to put my clear OEM lenses on them, any particular advise besides being careful? 😅 Do you have any video taking apart any Valentis?
Cheers bro! From PR!💪
I do vw tail lights from late 90s. They are glued together or moulded together I'm not sure. But the bond does not soften up with heat. Instead I go around between the lens and bucket with a flat screwdriver and give a little twist / pry. I've cracked a few so I know how it feels. But I think I've mostly mastered it now. Can usualy get away with only a few little cracks like the first one you got. Little hairline ones. Love the channel
looks like a nightmare to open
Why did you cut open jdm tsx tails instead if usdm ones
What about evo x tail lights, will that be a oven method or a cutting tool?
I stayed until the end just to see the end result. Love the videos
till the end….. I only do Nissan lol bake it
Great video as always! Using this as a reference on making my all clear taillights for the scion. Was just gonna swap the lense over from a spec D housing but now I may have to rethink my strategy 😂