If you want to change to LED bulbs in your Genesis Coupe, and do not want them hyper-blinking, you can either use load resistors or a flasher relay. The new 2013+ Genesis Coupe requires load resistors, sometimes two on each side you remove the bulbs. But the 2010-2012 Genesis Coupe, has one simple to change little relay just under the drivers side kick panel.
Pull the plug off the relay, plug the new relay in (available for 10 bucks from FlyRyde.com) and secure everything out of the way so you dont kick it with your foot. Done. No more hyper flashing.
Visit us at www.FlyRyde.com or call at 909 684 5044
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
Pull the plug off the relay, plug the new relay in (available for 10 bucks from FlyRyde.com) and secure everything out of the way so you dont kick it with your foot. Done. No more hyper flashing.
Visit us at www.FlyRyde.com or call at 909 684 5044
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
Hey man so i opened my headlights and wired led switch back strips as turn signals and I want to remove the oem turn signal bulb entirely however I can’t figure out how to get the hyperflashing Without the bulbs to stop any ideas?