2013 Hyundai Genesis Coupe Black Chrome Tail Lights with 16 Channel Sequential Amber LED turn signals. We took the brand new 2013 LED tail lights, and sawed them in half. Avoiding any damage to the lens or internal parts puts this process somewhere in between custom fabrication and surgery. Once the perimeter of the light was cut through, all extra plastic had to be trimmed to allow the internal bezel to release from the main lens. At this point all clear lenses were removed by gloved hands and packed inside boxes to set aside until re-assembly.
64 individual holes were first marked, then drilled to run wires from 16 Amber CREE LEDs, hooked to a custom coded micro-controller set to "stack" one LED after the next during the signal phase. A custom relay/capacitor combination is in place to interupt the Brake light circuit any time the signal is activated, to keep the Amber LEDs visible, even with the running lights on.
With no dust or print left behind, the lenses were eventually snapped back into place on the freshly coated Black Chrome bezels. All parts were assembled as though they had never come apart, and the housing was resealed along the perimeter where it was cut (which left a 1/16" channel all the way around the housing).
These lights are plug and play, and install in about 3-4 minutes.
Contact us for a custom build idea, or to get tips on doing your own custom work like we do. Email Sales @ FlyRyde.com or call us at (909) 684-5044 for a quote.
Check out our new website at WWW.FLYRYDE.COM and be sure to like our Fan Page at www.facebook.com/FlyRyde
Thanks for subscribing to the FlyRyde Channel here at Youtube!
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde