Photos can be seen here: http://www.flickr.com/photos/flyryde/sets/72157629614806234/
These headlights started out as stock Halogen based Evo X Headlights, which are the same as the Lancer. A set of 4 Morimoto Mini H1 Projectors were retrofit into the lights and aimed correctly to have all 4 HID beams on as low beams, and doubling as high beams. Each projector is sitting behind an E46 Shroud, which has been modified to allow light to pass through from the back side of each notch. A set of Morimoto xB Angel Eyes shines forward through the notches, and the low beams (or outer projectors) are also fitted with green LED Angel Eyes which are hooked up to a separate switch.
We debuted our new Evo X Clear Corner Reflectors on this build, which eliminate the stock Amber plastic reflector with a new clear piece. This reflector is backlit by a row of amber, and a row of white LEDs, which produce the "Switchback" effect when the turn signal is activated. White powers on with the White LED Angel Eyes by turn on the running lights, while the White side LEDs are shut off during signaling, where the Amber LEDs flash on an off. After the signal, the white comes back on.
For information on getting a truly custom set of lights build for your car or truck, visit our site @ http://www.FlyRyde.com or visit our Facebook Fan Page @ http://www.Facebook.com/FlyRyde
Dont forget to Subscribe to our YouTube Channel here! If you have questions or would like to get ahold of us, send emails to Sales @ FlyRyde.com and call us @ 909 684 5044
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
These headlights started out as stock Halogen based Evo X Headlights, which are the same as the Lancer. A set of 4 Morimoto Mini H1 Projectors were retrofit into the lights and aimed correctly to have all 4 HID beams on as low beams, and doubling as high beams. Each projector is sitting behind an E46 Shroud, which has been modified to allow light to pass through from the back side of each notch. A set of Morimoto xB Angel Eyes shines forward through the notches, and the low beams (or outer projectors) are also fitted with green LED Angel Eyes which are hooked up to a separate switch.
We debuted our new Evo X Clear Corner Reflectors on this build, which eliminate the stock Amber plastic reflector with a new clear piece. This reflector is backlit by a row of amber, and a row of white LEDs, which produce the "Switchback" effect when the turn signal is activated. White powers on with the White LED Angel Eyes by turn on the running lights, while the White side LEDs are shut off during signaling, where the Amber LEDs flash on an off. After the signal, the white comes back on.
For information on getting a truly custom set of lights build for your car or truck, visit our site @ http://www.FlyRyde.com or visit our Facebook Fan Page @ http://www.Facebook.com/FlyRyde
Dont forget to Subscribe to our YouTube Channel here! If you have questions or would like to get ahold of us, send emails to Sales @ FlyRyde.com and call us @ 909 684 5044
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde
Would love to see those on a car.
Great work, nice looking headlights!
Question: I presume these were halogen headlights which were retrofitted. Did you have to cut the reflector to fit the mini H1 projector in the low beam housing or was it directly plug and play? I'm asking because some say that you need to cut the reflector because it is quite shallow, and that the e46 ext shroud doesn't cover it…
Thanks!